DIA Polisher for the finishing of zircone
Zircone oxide becomes nowadays a very standard material with high demands. The esthetic benefits in combination with its high corrosion resistance and functional capacity offer indisputable advantages compared to metal based restauration. The finishing of Zircone is much more ambitious and requires a good technical knowledge in addition to high class instruments. It is important to use the right polishers to avoid any type of material damages or weakness which is caused by he

SHINE 2-in-1 Polisher
2 Step Polisher for pre-sintered Zirconia The new SHINE 2in1 polisher enables a quick and easy handling of the presintered Zirconia. The 2 different zones offer the opportunity to reduce and polish in one step. The grey part has a high reducing effect without causing any damages to the milling crowns and bridges. The white part achieves a precise polishing for the occlusal and interdental areas as well as the margin edges of the crown. With the optimum of 6.000 rpm, slightly

SKYROCK XT IV
Better control - precise flow out into the impression The new dentify SKYROCK XT IV offers many advantages. The modern composition provides united characteristics for the user. It is easy to mix and shows a fine consistency. The increased hardness with a compressive strength of 9.440 after 1 hour, makes it very stable while ditching. The Stone has very well flowing characteristics when it is under vibration (see picture 1). It has a high thixotropy and stays safe on the spatu
